|
IMPORTANT NOTE: Spray paints of any kind create a lot of airborne particles. Please ensure you are wearing the adequate PPE and have set up a suitable workspace as it will get covered in over-spray when those airborne particles settle. We recommend using the box your kit was delivered in as a temporary spray booth by laying it on the long side and spray your parts inside of it, this helps prevent over-spray. |
Follow the manufacturer's instructions to prepare your paint cans. You may wish to gently warm the cans using warm, BUT NOT HOT, water as this will allow the paint to flow more smoothly in smaller particles.
As with the priming, start spraying away from your part, and bring the paint across your part maintaining an even distance from the part surface. THIS video shows the correct technique for following a contoured surface.
After applying three (3) coats, waiting 10 to 15 minutes between each coat, allow the paint to fully dry overnight or according to the manufacturer's instructions.
|
IMPORTANT NOTE: Spray paints of any kind create a lot of airborne particles. Please ensure you are wearing the adequate PPE and have set up a suitable workspace as it will get covered in over-spray when those airborne particles settle. We recommend using the box your kit was delivered in as a temporary spray booth by laying it on the long side and spray your parts inside of it, this helps prevent over-spray. |